Variable Frequency Drive Indicators - Dexter Laundry T-350 Operator's Manual

3.4

VARIABLE FREQUENCY DRIVE INDICATORS

There are three small red LEDs located on the upper Variable Frequency
Drive (VFD) cover. They are labeled as "READY", "RUN", and "FAULT"
and can be used for troubleshooting. The definitions of the LEDs are
listed in Table 2 below.
8514-290-001 REV B page 25
Washer Condition
Idle Mode
(No Cylinder Movement)
Tumbling
Stop from Tumble
Ramp to Intermediate or
Final Extract Spin
Spinning
(Intermediate or Final)
Stop from Spin
(Intermediate or Final)
Faulted
Table 2: Variable Frequency Drive Indicators
"READY"
"RUN"
LED
LED Status
Status
ON OFF
ON ON
ON FLASHING
ON ON
ON ON
ON FLASHING
ON OFF
"FAULT"
LED
Status
OFF
OFF
OFF
OFF
OFF
OFF
ON