Emerson Rosemount CX1100 Reference Manual page 21

Reference Manual
00809-0100-4110
Figure 2-10: Panel Mount Bottom View
A. Six ½-in. (12.7 mm) NPT conduit openings
Figure 2-11: Panel Cut-Out
Procedure
1. Ensure all components are available to install the remote transmitter.
2. Select a mounting location near or removed from the probe.
3. Mount at a height convenient for viewing and operating the interface.
4. The keypad window on the transmitter may have an exterior protective membrane.
Reference Manual
Consider the temperature limitations of the remote transmitter. Refer to product
specifications when selecting the mounting location.
Emerson recommends approximately 5 ft. (1.5 m).
Remove the protective membrane prior using the transmitter.
Install
May 2023
21