Removal Of Crane Components - probst ASSK 150-4 Operating Instructions Manual

DELIVERY, PACKAGING AND TRANSPORT
4.4

Removal of crane components

The packaging of the individual components and the disposable pallets must be opened carefully!

When using knives or blades to open the packaging, take care not to damage any of the
components. Do not take the parts out of the packaging until you are ready to begin installation
(to protect against physical damage).

Remove the packaging from the crane jibs and crane columns.

Lay the components on a base, e.g. cardboard, so that they cannot be damaged.

Avoid undertaking any other mechanical tasks in the area of the sections; otherwise there is a
danger that chips and dirt could get into the section grooves.
CAUTION
ATTENTION
The packaging material must be disposed of in accordance with country-specific
laws and guidelines. Labeled transport aids and safety mechanisms must be
removed.
32 | EN
Heavy components in the transportation box
When opening the transportation box, parts can splinter or fall. This can cause
crushing wounds and lacerations.
►
Wear protective footwear (S1),
work gloves (safety category 2133)!
Improper removal of system from the transportation box
System damage
►
Do not apply force
►
Observe the instructions for removing the system from the transportation box
30.30.01.00225/01