3.4.3 FILE
Selecting "FILE" on the menu screen.
Saved measurement data can be managed here.
You can view or delete data, turn ON/OFF the data saving
function, and check the remaining memory.
"
A)DATA LIST
Move the cursor to "DATA LIST" and press the [SET] key.
Data from "STANDARD MODE" & "CALCULATION MODE"
are listed and can be viewed here.
Use [△][▽] keys to move the cursor.
Press [SET] key to select and display the content of the
selected data.
Press [MENU] key to return.
Measurement data screen as left shown.
Press the [mg/m³] key to switch the units between CPM &
mass concentration.
Press [SET] key to display the data details.
Press [MENU] key to return.
One data point per row, showing time of measurement and
relative concentration measured.
Press the [mg/m³] key to switch the units between CPM &
mass concentration.
Press [SET] key to display the graph.
Use [△][▽] keys to scroll up and down.
Press [MENU] key to return.
38