Table of Contents
Advertisement
B）FREE MODE
Measurement Time
01sec
[△]key 1sec UP ↓ ↑ [▽]key 1sec DOWN
01min
[△]key 1min UP ↓ ↑ [▽]key 1min DOWN
99min
C）MANUAL MODE
In "FREE MODE" , the measurement time can be set in
1-second increments for the range of 1~59 seconds and in
1-minute increments for the range of 1~99 minutes.
While the time setting is highlighted, use the [△][▽] keys
to change the measurement time.
Move the cursor to "FREE MODE" and press the [SET] key.
The measurement time can be set.
Use the [△][▽] keys to change time setting,
press the [SET] key to save the setting and display the
measurement screen
*Measurement data cannot be saved at this mode.
Press [MENU] key to leave the setting screen.
*Setting will not be saved.
Move the cursor to "MANUAL MODE" and press the [SET]
key to enter the measurement screen.
In "MANUAL MODE" , measurement can be started and
stopped by pressing the [START/STOP] key at any timing.
*Measurement data cannot be saved at this mode.
25
Advertisement
Table of Contents
