Table of Contents
Advertisement
1）START DATE / TIME
2）SAMPLING TIME
3）No.TRIAL(N)
4）SET TO START
Set START DATE/ TIME values in the order of year →
month → day → hour → minute → second.
Set SAMPLING TIME value in the order of hour → minute.
The input range of the sampling time can be set from
1 second to 99 minutes and 59 seconds.
Set No.TRIAL(N) value from large digits to small.
10,000 → 1,000 → 100 → 10 → 1 .
The input range of the number of measurements can be
set from 1 to 65535 times.
After completing all settings,
Move cursor to "SET TO START" and press [SET] key,
the measurement will start as set.
*Measurement results will be stored in memory.
34
Advertisement
Table of Contents
