Time Series Graph; Time Series Graph Indication Parameter Set Up; Select Probe To Display - Kanomax 1550 Instruction Manual

6.6 Time Series Graph

1) Time series graph indication parameter set up

Pic. 21 Time series graph indication parameter set up dialogue box
Set up vertical and horizontal line of time series graph, and select probe to display.
Air velocity : 0～90m/s
Humidity : 0～100%RH

2) Select probe to display

Double click the probe
you want to display
Pic. 22 Time series graph – select probe to display dialogue box
You can select only one probe to display time series graph. To display time series graph on probes in plural,
Repeat "select probe to display" and open graph indication windows in plural.
Select only times
When you click, dialogue box to
select probe to display will appear
Temperature : -50～600℃
Pressure : -6～6kPa
19
You con not select probe
which is disconnected