How To Display Fluctuation Graph - Kanomax Anemomaster 6162 Operation Manual

2. Basic Operation

2.3 How to Display Fluctuation Graph

You can monitor velocity fluctuation for 90 seconds.
(* This function cannot be used in the calculation mode.)
Display
'08.07.01 FAST
10:26:40
5.38 m/s
25.7 ℃
m/s VEL. FAST
50
0
TIME (20S/DIV)
m/s VEL. FAST
25
0
TIME (20S/DIV)
m/s VEL. SLOW1
25
0
TIME (20S/DIV)
m/s VEL. SLOW2
25
0
TIME (20S/DIV)
'08.07.01 SLOW2
10:26:40
5.38 m/s
25.7 ℃
hold VEL. SLOW2
25
0
TIME (20S/DIV)
Key
▽ Press ▽ key.
▽
Press ▽ key again.
▽
★ Air velocity range changes.
FAST/SLOW key is useful when ...
FAST/SLOW
>>> reading varies significantly and it is hard to see the graph.
Press FAST/SLOW key.
····· SLOW 1 (moving average deviations for 5 sec.)
FAST/SLOW
Press FAST/SLOW key
····· SLOW 2 (moving average deviations for 10 sec.)
Press △ key to go back to the original screen.
△
HOLD Press HOLD key
★ Display screen will be on hold.
Even while the reading is on hold, you can still change the
range and switch FAST/SLOW.
PRINT Press PRINT key
★ When the reading is on hold, the display can be printed out.
Procedure
▽ key
Range: 50, 25, 10, 5, 2, 1 m/s
m/s VEL. FAST
FAST/SLOW key
50
FAST, SLOW1, SLOW2
Air velocity value
0
TIME (20S/DIV)
updated every 1 sec
one screen: 90 sec
measuring time
(sec)
time axis
10
P9
20 sec
90 sec