Highway Driving Assist Operation - Hyundai Palisade 2024 Owner's Manual

Highway Driving Assist
Operation
Basic function
Displaying operating status
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the cluster. Refer to "View
Modes" section in chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
B360EU01
[A] : Operating state
[B] : Standby state
1. Highway Driving Assist indicator,
whether there is a vehicle ahead and
the selected distance level
* Highway Driving Assist indicator
• Green : Operating state
• Grey : Ready state
• White blink: Accelerator
depressed state
2. Set speed
3. Lane Following Assist indicator
4. Whether there is a vehicle ahead and
the selected headway
5. Whether the lane is detected or not
Information
• For more details on the display refer to
"Smart Cruise Control (SCC)" and
"Lane Following Assist (LFA)" sections
in this chapter.
• The images and colors in the
instrument cluster may differ
depending on the cluster type or theme
selected from the settings menu.

Highway Driving Assist operation

Highway Driving Assist operates when:
• Driving on the main road of highways,
and turning on Highway Driving Assist
by pressing the Driving Assist button.
• Entering the main road of highways
while Lane Following assist and Smart
Cruise Control are operating
B0348EU06
Restarting after stopping
When Highway Driving Assist is
operating, your vehicle will stop if the
vehicle ahead of you stops. Also, if the
vehicle ahead of you starts moving within
30 seconds after the stop, your vehicle
will start as well. In addition, after the
vehicle has stopped and 30 seconds have
passed, the 'Use switch or pedal to
accelerate' message will appear on the
cluster. Depress the accelerator pedal or
operate the + switch, - switch or
switch to start driving.
7
7-95