Lcd Display Messages - Hyundai Palisade 2024 Owner's Manual

Table of Contents

Advertisement

LCD Display Messages

Vehicle is on
This message is displayed if you open the
driver's door when the gear is in P (Park)
and the ignition switch in the ON or
START position.
Turn the engine off before leaving the
vehicle.
Shift to P
This message is displayed if you try to turn
off the vehicle without the gear in the P
(Park) position.
If this occurs, the ignition switch places to
the ACC position.
Vehicle is in N. Press START button
and shift to P
if equipped
This message is displayed if you try to turn
off the vehicle with the gear in N
(Neutral).
To turn off the vehicle:
1. Press the Engine Start/Stop button. The
button will change to the ON position.
2. Press the P button to shift to P (Park).
3. Press the Engine Start/Stop button
again, then the vehicle will turn off.
Low key battery (for smart key
system)
This message is displayed if the battery of
the smart key is discharged while
changing the ignition switch to the OFF
position.
Press brake pedal to start engine
This message is displayed if the ignition
switch changes to the ACC position twice
by pressing the button repeatedly
without depressing the brake pedal.
You can start the vehicle by depressing
the brake pedal and then placing the
ignition switch.
Key not in vehicle (for smart key
system)
This message is displayed if the smart key
is not in the vehicle when you leave the
vehicle with the ignition switch in the ON
or Start position.
Always turn off the engine before leaving
your vehicle.
Key not detected (for smart key
system)
This message is displayed if the smart key
is not detected when you place the
ignition switch.
Press START button again (for smart
key system)
This message is displayed if you were
unable to start the vehicle when the
Engine Start/Stop button was pressed.
If this occurs, attempt to start the engine
by pressing the Engine Start/Stop button
again.
If the warning message appears each
time you press the Engine Start/Stop
button, have your vehicle inspected by an
authorized HYUNDAI dealer.
Press START button with digital key
This message is displayed if you press the
Engine Start/Stop button while the
warning message "Key not detected" is
displayed.
At this time, the immobilizer indicator
light blinks.
4
4-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Palisade lx2 2024

Table of Contents