Hyundai Palisade 2024 Owner's Manual page 73

B0059KO11
To release your seat belt:
Press the release button (1) in the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen, check
the belt to be sure it is not twisted, then
try again.
NOTICE
Although the seat belt retractor provides
the same level of protection for seated
passengers in either emergency or
automatic locking modes, the emergency
locking mode allows seated passengers
to move freely in their seat while keeping
some tension on the belt. During a
collision or sudden stop, the retractor
automatically locks the belt to help
restrain your body.
To deactivate the automatic locking
mode, unbuckle the seat belt and allow
the belt to fully retract.
Second row center seatbelt (3-point
rear center seat belt)
B0059KO12
1. Take out the buckle (B), which is stored
between the seat/seatback cushions.
2. Insert the metal plate (A) into the
buckle (B), until it clicks.
You can make sure its secure fastening
by pulling the seatbelt webbing. The
buckle with 'CENTER' mark should be
used for the 3-point seatbelt.
3. Restore the buckle between the
seat/seatback cushion after
unfastening the seatbelt.
Rear center seatbelt (3rd row)
B0059KO08
To fasten your seatbelt:
1. Extract the tongue plate (A) from the
hole on the belt assembly cover.
3
3-39