Highway Driving Assist Operation - Hyundai IONIQ 5 Owner's Manual

Driver Assistance System
Highway Driving Assist
Operation
Basic function
Display and control
You can see the status of the Highway
Driving Assist operation in the Driving
Assist view on the cluster. Refer to "View
Modes" section in chapter 4.
Highway Driving Assist will be displayed
as below depending on the status of the
function.
Operating state
ONE1071103N
Standby state
ONE1071104N
1. Highway Driving Assist indicator,
whether there is a vehicle ahead and
the selected distance level are
displayed.
* Highway Driving Assist indicator
• Green : Operating state
• Grey : Standby state
7-98
• White blink: Accelerator
depressed state
2. Set speed
3. Lane Following Assist indicator
4. Whether there is a vehicle ahead and
the selected headway
5. Whether the lane is detected or not
Information
For more details on the display refer to
"Smart Cruise Control (SCC)" and "Lane
Following Assist (LFA)" sections in this
chapter.
Highway Driving Assist operating
Highway Driving Assist operates when:
• Driving on the main road of highways,
and turning on Highway Driving Assist
by pressing the Driving Assist (
button.
• Entering the main road of highways
while Lane Following assist and Smart
Cruise Control are operating
Information
• While driving on the highway, if Smart
Cruise Control starts operating,
Highway Driving Assist will operate.
• When entering the main roads of
highways while Smart Cruise Control is
operating, Driving Assist will not turn on
if Lane Following Assist is turned off.
)