Tire Rotation - Hyundai Palisade 2024 Owner's Manual

Tire Rotation

To equalize tread wear, HYUNDAI
recommends that the tires be rotated
according to the maintenance
schedule or sooner if irregular wear
develops.
During rotation, check the tires for
correct balance.
When rotating tires, check for uneven
wear and damage. Abnormal wear is
usually caused by incorrect tire
pressure, improper wheel alignment,
out-of-balance wheels, severe
braking or severe cornering. Look for
bumps or bulges in the tread or side
of the tire. Replace the tire if you find
any of these conditions. Replace the
tire if fabric or cord is visible. After
rotation, be sure to bring the front
and rear tire pressures to
specification and check lug nut
tightness (proper torque is 79-94
lbf·ft [11-13 kgf·m]).
Without a spare tire
S2BLA790A
Directional tires (if equipped)
CBGQ0707A
Disc brake pads should be inspected
for wear whenever tires are rotated.
Information
The outside and inside of the
unsymmetrical tire is distinguishable.
When installing an unsymmetrical
tire, be sure to install the side marked
"outside" face the outside. If the side
marked "inside" is installed on the
outside, it will have a negative effect
on vehicle performance.
WARNING
• Do not use the compact spare tire
for tire rotation.
• Do not mix bias ply and radial ply
tires under any circumstances. This
may cause unusual handling
characteristics that may cause loss
of vehicle control resulting in an
accident.
9
9-33