Hyundai Palisade 2024 Owner's Manual page 432

Driver Assistance System
Changing set speed
B0331EU05
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or - switch on the steering wheel.
Set Speed Auto Change (Navigation
equipped)
B0331EU04
Manual Speed Limit Assist or Smart
Cruise Control assists the vehicle to
adjust its speed according to the speed
limit. When the cruising speed is set as
same as the speed limit, the vehicle
automatically adjusts its speed if the
speed limit changes. The function
operates on the road which has a speed
limit of 44 mph (70 km/h) or higher. When
the function is active, the cruising speed
on the instrument cluster appears in
green.
7-56
WARNING
• If you want to drive below the speed
limit, adjust the Offset under '0' or use
the - switch on the steering wheel to
lower the set speed.
• Even after changing the set speed
according to the speed limit of the road,
the vehicle can still be driven over the
speed limit. If necessary, depress the
brake pedal to reduce your driving
speed.
• If the speed limit of the road is under 20
mph (30 km/h), the set speed change
function will not work.
• Intelligent Speed Limit Assist operates
using the speed unit in the instrument
cluster set by the driver. If the speed
unit is set to a unit other than the speed
unit used in your state, Intelligent
Speed Limit Assist may not operate
properly.
Information
• For more details on Manual Speed Limit
Assist operation, refer to "Manual
Speed Limit Assist (MSLA)" section in
this chapter.
• For more details on Smart Cruise
Control operation, refer to "Smart
Cruise Control (SCC)" section in this
chapter.