5. USING THE ROBOTIC POOL CLEANER
5.1 Setup
Before using the Robotic Pool Cleaner for the first time, perform the following steps:
5.1.1
Position the power supply
at approximately the middle of the
long side of the pool, at least at a
distance of 3.5m /12ft.
2
5.1.3
Attach the floating cable to the power supply:
Insert the cable with the notch on the connector (1),
lined up with the groove in the socket on the power
supply, and turn clockwise (2).
M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner
cm
in
minimum
cm
in
minimum
5.1.2
Unwind the cable and stretch it out completely so that it
has no kinks.
1
User Instructions
|
5