Led Lights - Maytronics ACTIVE 6 User Instructions

8.4 LED Lights

Connectivity LEDs
The connectivity LED light on the power supply has several modes:
1. Flashing blue light - waiting for Bluetooth® connection.
2. Steady blue light - connected via Bluetooth®.
3. Flashing green
trying to connect to the cloud.
4. Steady green light - power supply is now connected to the Wi-Fi® network and to the cloud.
5. Alternating blue
Appear also while using the remote-control.
On/Off LEDs
blue
1. Steady light - Power supply is ON, and the pool cleaner is working.
2. Flashing green
blue/green/red
3. Alternate
Please wait until process is completed.
4. Steady red light – error. Refer to troubleshooting.
5. Orange light - Filter is clogged up. Please clean the filter.
Tips
• If the app is stuck on the same screen for over 2 minutes, close the app and re-open it.
• To test your Wi-Fi® signal strength and quality, play a video via your smart device browser.
Power supply On/Off button features:
1. Operating - Press the On/Off button for up to 5 sec.
2. Quick start - This feature activates a specific feature via the power supply.
*In selected models, these features can be changed via the app.
To activate the quick start feature, press and hold the On/Off button for 5 sec.
The blue led light will blink 3 times.
3. Automation mode - This feature allow you to connect to your smart-home.
To activate the automation mode, press and hold the On/Off button for 15 sec.
The blue led light will blink 3 times.
14 M600 / ZENIT 60 / ACTIVE X6 / ACTIVE ULTIMATE Robotic Pool Cleaner
light - power supply is connected to your home/pool Wi-Fi® network and
and green light - power supply is connected via Bluetooth® and to the cloud.
light - waiting for the next operation (delay mode or weekly timer).
lights – program updating remotely.
User Instructions
|