Table of Contents
Advertisement
In the pop-up window enter the IP
address for your device along with the
other values shown below. The default
user sets in the X-1605 device are:
Username: admin
Password: admin!
Username: operator
Password: operator!
Click "OK" when finished.
These are intended for default access
only and should be changed with the
NVR/NVT management software or via
the web UI.
See the Onvif User Management
section for information on adding users.
Within a few seconds the circle next to
your device in the "Added Devices"
window should turn green as shown to
the right.
If the circle stays red, check your
credentials, and click on "Reconnect
IPC" to renegotiate.
23
Advertisement
Table of Contents
