Viking X-1605 Series Product Manual page 16

Configure Tab
Announcement Settings
When enabled, the Announcement is played
on outbound SIP calls once the call is
connected. This audio is heard from the
speaker and sent to the connected device.
The Announcement will also play on
inbound calls if the Access Code and a " "
Q
are dialed. The Number Of Announcements
setting controls how many times the audio
file will automatically play (8 seconds
between plays). Select your uploaded file
from the Announcement Filename drop
down (your file will have a ".vsf" file
extension). If you have not uploaded a file
yet, click on the Manage button to open
Audio Files Management, see page X.
Configure Tab
Diagnostics
Mic/Speaker Diagnostics:
The microphone and speaker are tested at
the same time when the Run Test button is
clicked. A tone will play from the speaker,
and the microphone will listen. Background
noise can affect this, so there are
configurable values for audio levels (Mic
Level, Speaker Level). In quiet areas, these
can be lowered, in louder areas they may
have to be increased.
Relay Diagnostics:
The Relay Diagnostic allows you to test your
relay contact wiring without making a SIP
call. Enter the Activation Time you would like
the relay to stay on for and click on Run
Relay Diagnostic. The button in the UI will
turn Green for the duration of the closure.
16