Table of Contents
Advertisement
Stream Tab
RTSP Stream Settings
These settings will affect the video stream sent
to the NVR. These settings can also be
configured through your NVR which will use
Onvif compliant requests to change video and
audio streaming settings. If a video stream is
already running, it will have to be restarted for
the setting to take effect.
Setting
Description
Enabled or Disabled. When set to disabled the RTSP server is disabled. The RTSP
RTSP
stream cannot be viewed by an NVR.
RTSP Encoder
H264 or MJPEG. Selects the encoding for the video sent from the RTSP server.
RTSP Resolution
The width and height of the video sent from the RTSP server.
Enabled or Disabled. When enabled, video from the RTSP server is sent to the
RTSP Multicast
programmable multicast address. The stream can be viewed with a media player, or
an older NVR that is not Onvif compliant.
RTSP Port
1-65535. This is the port the RTSP stream is negotiated on.
RTSP Multicast
234.0.0.0-238.255.255.255. This is the address the RTSP multicast is sent to when
Address
RTSP multicast is enabled.
RTSP Video Port
1025-65535. The port the RTSP video will be sent to.
RTSP Bitrate
The H264 bitrate limit in Kb/s. The acceptable range is 64-8000 (Kb/s).
1-30 FPS. The maximum allowed frames per second of the RTSP video stream. This
RTSP FPS
will reduce automatically when a SIP call is also sending video.
13
Factory Default
Enabled
H264
1920x1080
Disabled
554
234.86.73.75
5004
2048 Kb/s
30 FPS
Advertisement
Table of Contents
