Table of Contents
Advertisement
Stream Tab
Onvif NVR User Settings
Additional Onvif users can be added on the
stream tab. Users have a selectable level of
access. Choices are Admin, Operator, User,
or Anonymous. For example, someone that
should only have rights to view the stream
without modifying any settings should be
assigned the 'User' level.
To add a new user, follow these steps:
STEP 1
Enter the username
Enter the password (8 characters with at
STEP 2
least one capitol letter)
STEP 3
Select the user level.
STEP 4
Click the 'Add' button to update the list.
STEP 5
Repeat steps 1-4 to add more users.
When all users are added, click on 'Apply'
STEP 6
to send the list.
Stream Tab
Call Stream Settings
These values are requested on an outbound
call from the X-1605. The Call (SDP)
negotiation may reduce these values to
lower values based on the SIP server/SIP
endpoint limitations.
Inbound calls to the X-1605 device may
have different values requested, the SDP will
negotiate down if necessary.
Setting
Description
The maximum allowed bitrate (Kb/s) for video during a SIP call. Acceptable range is
Bitrate
100-10000.
The maximum allowed frames per second for video during a SIP call. Acceptable
FPS
values are 1-15 FPS.
The maximum allowed width and height of the video during a SIP call. There are four
Resolution
selectable resolutions: 1920x1080, 1280x720, 704x576, and 352x288.
Important: The users 'admin' and 'operator' cannot be removed. Editing
user names and/or passwords is not allowed after the list has been 'Applied'.
To modify a user, delete the user and create a new one.
12
Factory Default
2500 Kb/s
15 FPS
1920x1080
Advertisement
Table of Contents
