Using The Maintenance Menu - Kyocera ECOSYS M2040dn Operation Manual

Troubleshooting > Using the Maintenance Menu

Using the Maintenance Menu

You can use the [Maintenance Menu] to adjust the print position and scan position, and maximize the print quality for
the elevation of your location.
Maintenance Menu User Guide
Item
Adjust print Printing start position
position
Center Line
Adjust scan Platen
position
Document
Processor
Adjust print Drum charge setting
quality
Altitude setting
Drum refresh
Enter or select the top margin start position for printing.
Value: 0 to 300 mm (in 5 mm increments)
Enter or select the left margin start position for printing for each
available paper source. This setting is available for each cassette
when optional paper feeders are installed.
Value: -25 to 25 mm (in 5 mm increments)
Scanning start Enter or select the top margin scan start position for the platen.
position
Value: -45 to 45 mm (in 5 mm increments)
Center Line Enter or select the left margin scan start position for the platen.
Value: -50 to 50 mm (in 5 mm increments)
Scanning start With a document processor installed, enter or select the top margin
position scan start positions for front and back.
Value: -25 to 25 mm (in 5 mm increments)
Scan end With a document processor installed, enter or select the bottom
position margin scan end positions for front and back.
Value: -25 to 25 mm (in 5 mm increments)
Center Line With a document processor installed, enter or select the left margin
scan start positions for front and back.
Value: -50 to 50 mm (in 5 mm increments)
When print quality has deteriorated, the output of the main charger
can be changed to restore print quality.
Value: 1 to 7
If you are using the machine at an altitude of 1,000 m or higher and
print quality has deteriorated, the Altitude setting can be used to
restore print quality.
Value: Normal, 1001 - 2000m, 2001 - 3000m, 3001 - 3500m
Perform Drum refresh when images show streaking with white lines.
10-11
Description