Maintenance Menu - Kyocera FS-1025MFP Operation Manual

Maintenance Menu

The Maintenance Menu that the user can adjust from KYOCERA Client Tool is described below. In addition, also refer to
KYOCERA Client Tool User Guide.
Maintenance Menu
Adjust print Drum charge
quality setting
Altitude setting
Drum refresh
Adjust print Printing start
position position
Print margins
Description
When print quality has deteriorated, the output of the main charger can be
changed to restore print quality.
If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude setting can be used to restore print
quality.
Perform Drum refresh when images show streaking with white lines.
Single-sided printing
Adjust the position of the printed
image.
Duplex printing
Adjust the position of the image
printed on the back side of the paper
when duplex printing is used.
Adjust the width of the top edge,
bottom edge, left edge and right edge
margins.
Note This setting is not effective for
the printing from the machine.
8-8
Maintenance
B
A
A: Left edge Top edge: +10
B: Top edge
B
A C
D
A: Left edge Top edge: +10
B: Top edge
C: Right edge
D: Bottom edge