Kyocera ECOSYS M2040dn Operation Manual page 344

Troubleshooting > Troubleshooting
H
Message
High temperature.
Adjust room temp.
I
Message
Incorrect account ID.
Job is canceled.
Incorrect Login User
Name or Password. Job
*1
is canceled.
Inner tray is full of paper.
Remove the paper.
Insufficient memory.
Cannot start the job.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-27)
J
Message
Job Accounting
restriction exceeded.
Job is canceled.
K
Message
KPDL error. Job is
*1
canceled.
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Err. Clear (page 8-27)
Checkpoints
―
Checkpoints
—
*1
—
—
—
Checkpoints
Is the acceptable printing count
restricted by Job Accounting
exceeded?
Checkpoints
―
Corrective Actions
Adjust the temperature and the
humidity of your room.
Corrective Actions
The account ID was incorrect when
processing the job externally. The
job is canceled. Select the [OK] key.
The login user name or password
was incorrect when processing the
job externally. The job is canceled.
Select the [OK] key.
Remove paper from the inner tray.
Select [Continue] to resume printing.
Select [Cancel] to cancel the job.
Job cannot be started. Try again
later.
Corrective Actions
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
This job is canceled. Select the
[OK] key.
Corrective Actions
PostScript error has occurred. The
job is canceled. Select the [OK] key.
10-20
Reference
Page
―
Reference
Page
—
—
—
—
Reference
Page
―
Reference
Page
―