Table of Contents
Advertisement
Raptor MicroATX – Installation Guide
Supported Input Modes
The SP1015 can handle up to 3 different input modes (custom solutions
may differ from these four modes). An input mode is defined by the
relationship of its horizontal resolution with its vertical resolution.
Therefore, input modes with the same horizontal and vertical resolution
but with different frame rates are still considered as a single input
mode.
•
640x480 (VGA)
•
800x600 (SVGA)
•
1024x768 (XGA)
Special Notes about the On-board Video Controller
LVDS and DVI devices may be connected to the DVO port. The video
BIOS in the Raptor MicroATX are ready to deal with some modules.
EDID and EDID-less operation are available. The use of the DVO port
and the on-board SP 1015 depends on many parameters set in the video
BIOS and in on-board EEPROMs. Therefore, the use of these devices
will depend on custom solutions provided by the manufacturer of the
Raptor MicroATX.
The 82815 is a single video engine/pipeline device. Therefore, the
resolution and frequencies available when using only CRT,
DVI/LVDS, on-board SP 1015, and any possible combination of these
options will depend on the crossing of possibilities offered by each
single device and the 82815 itself.
Please, make sure that you have the proper support from the
manufacturer prior to using the DVO and/or on-board LCD
devices.
68
Advertisement
Table of Contents
