Custom Configuration Setup Screen - Aaeon Raptor MicroATX Installation Manual

System Management BIOS
The settings are Enabled (default) and Disabled. This option
assembles the SMBIOS (formerly DMI) information.

Custom Configuration Setup Screen

The hardware-specific features are configured with the Custom
Setup Screen.
L2 Cache
This option enables or disables the L2 Cache.
(Redir Debugger)
This option is not available.
Parallel Port
This option enables (default) or disables the Parallel Port.
Parallel Port IRQ
This option specifies the IRQ always used by the parallel port.
The settings are (IRQ) 5 and (IRQ) 7 (default).
Parallel Port Address
This option specifies the base I/O port address of the parallel
port on the motherboard. The settings are 378h (default), 278h
and 3BCh.
Parallel Port Mode
This option specifies the parallel port mode. The settings are:
Printer (default), ECP/EPP 1.7, SPP, SPP/EPP 1.9, ECP,
ECP/EPP 1.9, and SPP/EPP 1.7.
Chapter 2:BIOS Configuration
23