Table of Contents
Advertisement
Date/Time
Select the Date/Time option to change the date or time. The
current date and time are displayed. Enter new values through
the displayed window.
NumLock
Set this option to Disabled to turn the Num Lock key off when
the computer is booted so you can use the arrow keys on both
the numeric keypad and the keyboard.
Seek at Boot
Set this option to the device that will perform a Seek operation
at system boot. The settings are Floppy (default), IDE, Both, and
None.
Typematic Rate
The settings are 30 cps (default), 24, 20, 15, 12, 10, 8, and 6.
Typematic Delay
The settings are 250 ms (default), 500 ms, 750 ms, 1000 ms, and
disabled.
Config Box
Set this option to show the configuration box during boot. The
settings are Enabled (default) and Disabled.
Memory Test Tick
The settings are Enabled (default) and Disabled.
Chapter 2:BIOS Configuration
19
Advertisement
Table of Contents
