Table of Contents
Advertisement
Raptor MicroATX – Installation Guide
Appendix A - Technical Specifications
A complete listing of all the major technical specifications of
the Raptor MicroATX is provided.
Appendix B - Flash BIOS Programming (optional) and Codes
Provides all information necessary to program your optional
General Software Embedded 2000 Flash BIOS. POST Codes
and beep codes are described in details.
Appendix C - Communication Devices
Two on-board 10/100 Ethernet controllers and four serial ports
(Two RS232 + Two RS232 or RS422/485(optional)).
Appendix D - On-Board Video Controller (LCD Optional)
On-board CRT video controller/LCD (optional).
Static Electricity Warning!
The Raptor MicroATX has been designed as rugged as possible but can
still be damaged if jarred sharply or struck. Handle the motherboard
with care.
The Raptor MicroATX also contains delicate electronic circuits that
can be damaged or weakened by static electricity. Before removing the
Raptor MicroATX from its protective packaging, it is strongly
recommended that you use a grounding wrist strap. The grounding
strap will safely discharge any static electricity build up in your body
and will avoid damaging the motherboard. Do not walk across a carpet
or linoleum floor with the bare board in hand.
Warranty
This product is warranted against material and manufacturing defects
for two years from the date of delivery. Buyer agrees that if this
product proves defective the manufacturer is only obligated to repair,
replace or refund the purchase price of this product at manufacturer's
VI
Advertisement
Table of Contents
