Sea Breeze SHE9H4ZIGB Service Manual page 95

Step 9: Remove fan blade, motor and motor support
a. Remove the nuts fixing axial flow blade
with wrench, and then remove the fan
blade.
b. Remove the two (2) screws connecting
motor support and chassis, loosen
damper block and then remove the
motor support.
c. Remove the four (4) screws fixing
motor, and then remove the motor.
Step 10: Remove four-way valve assembly
Recover all the refrigerant from the system.
Unsolder the brazed joint between the four-
way valve and accumulate, the compressor
cut-off valve and condenser assembly. Then
remove the 4-way valve assembly.
Note: Wrap the valve body with wet cloth
completely while unsoldering to avoid
damaging the valve caused by high
temperature.
86