Step 6: Remove front grille and outer case
Remove the four (4) screws connecting the
front grille and outer case, and then remove
the grille.
Step 7: Remove outer case
Remove the screws connecting outer case and
motor support, middle isolation sheet and
chassis, pull the outer case upward slightly,
loosen clasps between outer case and the
right side plate, the left side plate, and then
remove the outer case.
Step 8: Remove electric box assembly
Assembly the disassembled main parts in
the reverse order as it was disassembled.
Power on the unit to test it is working
properly.
outer case
85