Sea Breeze SHE9H4ZIGB Service Manual page 89

Step7: Remove isolation sheet
Remove the three (3) screws fixing the
isolation sheet to remove it.
Step8: Remove cut of valve and valve support
Unscrew the two (2) bolts fixing the
valve assembly. Unsolder the brazed
joint connecting the gas valve and the
suction pipe. Remove the gas valve.
Note: Wrap the valve body with wet
cloth completely while unsoldering to
avoid damaging the valve caused by
high temperature.
Unsolder the brazed joint connecting
the liquid valve and the connecting
pipe. Remove the liquid valve.
Remove the screws fixing the valve
support and then remove it; remover
the screw fixing the condenser and then
pull the condenser upwards to remove
it.
80