Step 9: Remove four-way valve assembly
Recover all the refrigerant from the system.
Unsolder the brazed joint between the four-
way valve and accumulate, the compressor cut-
off valve and condenser assembly. Then
remove the 4-way valve assembly.
Note: Wrap the valve body with wet cloth
completely
while
unsoldering
damaging
the
valve
temperature.
Step 10: Remove valve support
Unsolder all brazed joint connected with valve
support and then remove the valve support.
Note: Wrap the gas valve and liquid valve with
wet cloth completely while unsoldering to
avoid damaging the valve caused by high
temperature.
to
avoid
caused
by
high
95