Table of Contents
Advertisement
PCI Quad / Lynx 8 Port RS232
• Note down IRQ, I/O address and SISR (the SISR is the Shared
Interrupt Status Register, which is a read only register which
returns an index value that identifies which port on the card has
an interrupt awaiting servicing by the driver software.) In this
case:
The IRQ = 11
The I/O address = 0140
The SISR = 0104
Windows 3.x Software Installation.
Place the Serial Solutions for Windows 3.x disk into a
suitable drive. From the File Menu choose 'Run' and enter
"a:\setup" (where a: is the path to the floppy drive with the
installation disk).
• Click OK, the Setup Program Main Screen is displayed:
By default, all component options will be installed,
selecting the "Del All" button will select all installed components
Software Configuration
Chapter 3 Page 25
Advertisement
Table of Contents
