Uninstalling Serial Solutions Pci - Brainboxes CC-313 Manual

PCI Quad / Lynx 8 Port RS232
• Transmit Buffer - These settings allow the
2. Defaults - When clicked this button resets the advanced
properties to the followed settings:
Use FIFO Buffers:
Transmit Buffers:
Receive Buffers:

Uninstalling Serial Solutions PCI.

To uninstall Serial Solutions PCI:
• From Control Panel, open the Add/Remove Programs applet,
then close the Control Panel.
• Select from the list Serial Solutions PCI.
• Click the Add/Remove button.
Windows NT will then uninstall the Serial Solutions PCI applet,
without the need for restarting.
value will allow the interrupt to be serviced quicker,
which is good for slow machines. If you have a fast
machine, setting a high value will give you more
time for multi-tasking operations.
selection of a transmitter FIFO trigger setting.
Selecting a low value will send fewer data-bytes per
interrupt, and this is recommended if you are
communicating to a slower machine. Selecting a
high value will send more data-bytes per interrupt,
and will give more time for multi-tasking
operations.
Software Configuration
On (checked)
14
14
Chapter 3 Page 23