Windows 3.X Software Installation - Brainboxes CC-265 Hardware Manual

PCI Quad RS232
w‚ˆs††‰„ˆÂ€w‚sÂETS!!
$‡sˆ‡ÂƒtÂ!&%% qƒ„iˆwp€s†suw‡ˆs†‡
UEUTÂw‡ÂiˆÂEQÂirr†s‡‡ÂBB7
Note down IRQ, I/O address and SISR (the SISR is the Shared
Interrupt Status Register, which is a read only register which
returns an index value that identifies which port on the card has
an interrupt awaiting servicing by the driver software.) In our
example:
The IRQ = 11
The I/O address = FF40
The SISR = FFA0

Windows 3.x Software Installation.

Place the Serial Solutions for Windows 3.x disk into a
suitable drive. From the File Menu choose 'Run' and enter
"a:\setup" (where a: is the path to the floppy drive with the
installation disk).
If you are installing from the Serial Solutions CDROM you will
need to insert the disk into your CDROM drive select File, Run
and type in the path <disk>:\diskimg\sswin3x\setup.exe where
<drive>:\ is the letter of your CDROM drive.
Software Installation
8i‚y EQÂirr†s‡‡ÂBB$
Chapter 3 Page 15