Table of Contents
Advertisement
World Of PC IEEE.
The PC IEEE does NOT have DMA ability. If you need
DMA driven IEEE handling then use the PC Elite card, this has
DMA interrupt sharing, allowing selection of one of three direct
memory access channels for high speed data transfer exceeding
300K bytes per second.
_______________ _
Address Switches.
The DIP switches enable the PC IEEE card to reside at
one of 128 base addresses with the PC, on any 4 byte boundary
within the 0200H to 03FCH ranges. Four PC IEEE cards in your
PC can provide access to 56 IEEE instruments.
Software Support.
________________
The low cost and high performance of PC data acquisition
and analysis software packages combined with the PC IEEE card
makes them ideal as powerful and inexpensive instrument
controllers. Keep your technology advancing whilst your capital
investment stays low!
The PC IEEE card comes complete with the easiest to use
PC based IEEE software in the world, the Pro-488 Device
Driver environment. Use Professional 488 to run the PC IEEE
from Basic, Pascal, C, Assembler, Fortran etc. In addition the
Pro-488 system will allow the PC IEEE to emulate a standard
PC parallel printer or serial printer port, thus providing IEEE
plotter support from most standard packages such as Lotus 123,
Autocad, Symphony etc.
Our Premier card, The PC Elite, is guaranteed fully 100%
compatible with Lotus Measure, LabTech NoteBook, Asyst,
DaDisp 488, Test Windows, Unkelscope, TBasic, True BASIC,
National Instruments IEEE software, and all software that
supports the IBM GPIB card.
Please Note that PC IEEE does NOT work with this
software, therefore, if you wish to use these popular data
Chapter 1
PC IEEE Reference
Page 3
Advertisement
Table of Contents
