Table of Contents
Advertisement
PCI Quad / Lynx 8 Port RS232
Software Configuration
Modifying Command Line Parameters.
When "assembled" the NEWCOM.SYS command line
looks like...
DEVICE=NEWCOM.SYS /A5-8,0140 /L 0104,11,5-8 /B8 /S 512 /H,4
...and should be entered into the CONFIG.SYS file. Once you are
sure that these parameters have been entered correctly, restart your
PC and your PCI Quad RS232 should be ready to use immediately.
Sample terminal applications are provided on "Serial Solutions
Disk 1 & 2" enabling communications to be established to your
peripherals quickly and easily.
PCI Lynx 8 Port RS232 Users: When "assembled" the
NEWCOM.SYS command line looks like:
DEVICE=NEWCOM.SYS /A5-12, 0140 /L0104,11,5-12 /B12 /S512
/H,4
Chapter 3 Page 35
Advertisement
Table of Contents
