Technical Data; Accessories - Gardena EasyCut 500/55 Operating Instructions Manual

Problem
Unit does not start
Unit can no longer be stopped
Hedge is not cleanly cut
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.

6. TECHNICAL DATA

Electric Hedge Trimmer
Motor power consumption
Mains voltage / Mains frequency 230 V / 50 Hz
Strokes
Length of blade
Tooth gap of blade
Weight
Sound pressure level L
Uncertainty k
PA
Sound power level L
WA
Uncertainty k
WA
Hand / arm vibration a
Uncertainty k
a
Measuring process complying with
The stated vibration emission value has been measured according to a standardized
test procedure and can be used for comparison of one electric power tool with
another. It can also be used for preliminary evaluation of exposure. The vibration
emission value can vary during actual use of the electric power tool.

7. ACCESSORIES

GARDENA Maintenance Oil
8
Possible Cause
Extension cable not connected
or damaged.
Blade blocked.
Start button is stuck.
Blade blunt or damaged.
EasyCut 420/45
(Art. 9830)
420 W
3,800 /min.
45 cm
18 mm
approx. 2.7 kg
1) 84 dB (A)
PA
3 dB (A)
2) measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
1) 3.8 m/s 2
vhw
1.5 m/s²
1) EN 60745-2-15 2) RL 2000/14/EC amended by 2005/88/EC
Extends the life of the blade.
Remedy
v Connect the extension cable
or if necessary replace it.
v Remove obstacle.
v Disconnect the mains cable
and loosen start buttons.
v Have blade replaced by
GARDENA Service.
EasyCut 450/50
(Art. 9831)
450 W
230 V / 50 Hz
3,800 /min.
50 cm
18 mm
approx. 2.8 kg
84 dB (A)
3 dB (A)
measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
3.8 m/s 2
1.5 m/s²
EasyCut 500/55
(Art. 9832)
500 W
230 V / 50 Hz
3,800 /min.
55 cm
18 mm
approx. 2.8 kg
84 dB (A)
3 dB (A)
measured 94 dB (A)
guaranteed 97 dB (A)
2.04 dB (A)
3.0 m/s 2
1.5 m/s²
Art. 2366