Table of Contents
Advertisement
6. Maintenance
Cleaning the Hedge Trimmer :
5
4
7. Troubleshooting
Fault
Hedge trimmer does not start
Hedge is not cleanly cut
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
8. Accessories
GARDENA Maintenance Oil
9. Technical Data
Power consumption, motor
Voltage / Frequency
Strokes
Length of cutter blade
Tooth gap of cutter blade
Weight
Workplace related
sound pressure level L
DANGER ! Risk of physical injury / electric shock !
V Always unplug the mains plug and slide the
A
V Do not clean the hedge trimmer under running
1. Clean the hedge trimmer with a damp cloth.
2. Lubricate the trimmer blade
GARDENA spray-oil Art. 2366). Avoid contact with the plastic
parts.
DANGER ! Electric shock !
V Always unplug the mains plug and slide the
A
Possible Cause
Extension cable not plugged
in or is damaged.
Blade blunt or damaged.
Extends the life of the blade.
EasyCut 48 PLUS (Art. 8874)
550 W
230 V / 50 Hz
2,400 / min.
48 cm
27 mm
3.5 kg
75 dB (A)
pA 1)
4
protective cover
over the cutter blade
before carrying out maintenance work.
water (especially high pressure).
5
with a low viscosity oil (e.g.
4
protective cover
over the cutter blade
before troubleshooting.
Remedy
v Plug in the extension cable
v Have blade replaced by
5
5
or if necessary replace it.
GARDENA-Service.
Art. 2366
15
Advertisement
Table of Contents
