Technical Data - Gardena EasyCut 450 Operating Instructions Manual

Fault
The Turbotrimmer
no longer cuts
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
8. Accessories
GARDENA Replacement
Filament Cassette
GARDENA
Additional wheel

9. Technical Data

Turbotrimmer
Motor power consumption
Mains voltage /
mains frequency
Filament thickness
Cutting width
Filament supply
Filament feed
Weight
Rpm of filament cassette
Work area related emission
characteristic value L
Noise level L 2)
WA
Hand / arm vibration a
Measuring method according to 1) EN 786 2) directive 2000 /14 / EC
18
Possible cause
Filament worn or too short.
Filament cassette empty.
Filament drawn into the
cassette or stuck together.
for EasyCut 400
EasyCut
(Art. 8846)
400 W
230 V / 50 Hz
1.6 mm
250 mm
6 m
Tip mechanism
approx.
2.4 kg
approx.
12,700 rpm
85 dB (A)
1)
pA
measured 95 dB (A) measured 95 dB (A) measured 95 dB (A)
guaranteed 96 dB (A) guaranteed 96 dB (A) guaranteed 96 dB (A)
1) < 2.5 m / s 2
vhw
Remedy
v Lengthen the filament –
see 4. Operation "Filament
feed (Tip mechanism for
automatic filament feed )".
v Replace the filament cassette
– see 6. Maintenance
"Replacing the filament
cassette" ).
v Pull the filament out of the
filament cassette (see above).
ComfortCut
(Art. 8847)
450 W
230 V / 50 Hz
1.6 mm
250 mm
6 m
Tip mechanism
approx.
2.8 kg
approx.
12,700 rpm
85 dB (A)
< 2.5 m / s 2
Art. No. 5307
Art. No. 5310
PowerCut
(Art. 8848)
500 W
230 V / 50 Hz
1.6 mm
270 mm
6 m
Tip mechanism
approx.
3.0 kg
approx.
12,300 rpm
85 dB (A)
< 2.5 m / s 2