Technical Data; Service / Warranty - Gardena ComfortCut Plus 500/27 Operating Instructions Manual

8. Technical Data

Turbotrimmer
Motor power consumption
Mains voltage / mains frequency 230 V / 50 – 60 Hz
Filament thickness
Cutting width
Filament supply
Filament feed
Rpm of filament cassette
Weight
Telescopic adjustment
of the turn handle
Workplace­related
emission values L 1)
pa
Uncertainty k
pa
Noise level L 2)
WA
Uncertainty k
WA
Hand / arm vibration a
Uncertainty k
a
Measuring process complying with
has been measured according to a standardised test procedure and can be used for comparison of one electric power tool with another.
It can also be used for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric
power tool.

9. Service / Warranty

Warranty:
20
ComfortCut 450/25
(Art. No. 9808)
450 W
1.6 mm
250 mm
6 m
Tip mechanism
approx. 12,800 rpm
approx. 3.3 kg
approx. 24 cm
84 dB (A)
3 dB (A)
measured 93 dB (A) /
guaranteed 94 dB (A)
1 dB (A)
3) 2
< 2.5 m/s
vhw
1.5 m/s²
1) 2)
DIN EN 60335-2-91 RL2000/14/EG
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults.
Under warranty we will either replace the unit or repair it free of
charge if the following conditions apply:
• The unit must have been handled properly and in keeping with
the requirements of the operating instructions.
• Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
The filament cassette and cassette cover are consumables and
are not covered by the guarantee.
This manufacturer's guarantee does not affect the user's existing
warranty claims against the dealer / seller.
If you have any problems with this product, please contact
our Service or return the defective unit together with a short
description of the problem – in case of guarantee, with a copy
of the receipt – postage paid to one of the GARDENA Service
Centres listed on the back of this leaflet.
ComfortCut Plus 500/27
(Art. No. 9809)
500 W
230 V / 50 – 60 Hz
1.6 mm
270 mm
6 m
Tip mechanism
approx. 12,200 rpm
approx. 3.3 kg
approx. 24 cm
83 dB (A)
3 dB (A)
measured 94 dB (A) /
guaranteed 96 dB (A)
2 dB (A)
2
< 2.5 m/s
1.5 m/s²
3)
DIN EN 786. The stated vibration emission value
PowertCut Plus 650/30
(Art. No. 9811)
650 W
230 V / 50 – 60 Hz
2.0 mm
300 mm
4 m
Tip mechanism
approx. 10,500 rpm
(Idle speed
approx. 9,500 rpm)
approx. 3.6 kg
approx. 24 cm
83 dB (A)
3 dB (A)
measured 93 dB (A) /
guaranteed 96 dB (A)
3 dB (A)
2
< 2.5 m/s
1.5 m/s²