Available Accessories; Technical Data - Gardena EasyCut Li-18/23 Operating Instructions Manual

Problem
The filament consumes
quickly
The trimmer stops.
ß
Error-LED flashes
W
Charging indicator lamp
the charger does not light up
Charging control lamp
on the charger flashes rapidly
(twice per second)
The trimmer stops.
ß
Error-LED flashes
W
The battery can no longer
be charged
Only an original GARDENA BLi-18 Replaceable Battery (Art. No. 9840) may be used.
This can be obtained from your GARDENA dealer or directly from GARDENA Service.
For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers
approved by GARDENA.

9. Available accessories

GARDENA
Replacement Battery BLi-18
GARDENA Filament Cassette
for Turbotrimmer

10. Technical Data

Turbotrimmer
Filament thickness
Cutting width
Filament supply
Filament feed
Rpm of filament cassette
Weight including battery
Workplace-related
emission values L 1)
pa
Uncertainty k
pa
Possible Cause
Frequent contact between the
filament and hard objects.
Battery overload.
High temperature. The allowed
operation temperature was
exceded.
9
on Battery charger or charging
cable not plugged in properly.
9
Charging error.
Battery error /
battery defective.
Battery is defective.
Battery for additional operating time or
for replacement with 2.6 Ah.
EasyCut Li-18/23
(Art. No. 9824)
1.5 mm
230 mm
10 m
Fully automatic
approx. 8500 rpm
approx. 2.8 kg
68 dB (A)
3 dB (A)
Remedy
v Avoid contact between the
filament and hard objects.
v Wait for 10 sec. Press button
on the battery and restart.
v Leave battery to cool for
approx. 15 min. Press button
on the battery and restart.
v Plug in battery charger and
charging cable properly.
v Unplug charger and plug
in again.
ß
v Press button on the
B
battery and restart.
v Replace the battery
(Art. No. 9840).
Art. No. 9840
Art. No. 5306
ß
B
ß
B
23