Table of Contents
Advertisement
Installing countertop dispensers with legs accessory (P/N AF10LBLEGS)
§ Do not tilt unit further than 30° off vertical plane.
§ Countertop dispensers that sit on legs (not bolted to counter) can be inadvertently moved. Care should be taken
when operating and cleaning to avoid accidents.
1. Carefully tip dispenser back to expose
underside and block up in place.
2. Screw legs (shipped taped to drain pan of
dispenser) into dispenser bottom, taking
care to seat legs securely against underside
of dispenser.
3. Attach bottom panel and hardware to bottom
of dispenser with supplied screws (Fig. 3).
4. Position unit in desired location and adjust
legs to level in both directions.
5. Make final connections.
CAUTION!
Fig. 3 - Bottom panel and leg assembly
leg
bottom panel
screw
12CI425A, 12HI425A
7
Advertisement
Table of Contents
