Table of Contents
Advertisement
3.2 Programming software
The programming software CoDeSys is a powerful PLC software programming tool, which can
support the IEC61131-3 standard IL, ST, FBD, LD, CFC, SFC six PLC programming languages. To
run programs on the controller, CoDeSys RTE needs to install programming software on a personal
PC. After programming, use the OP cable or network cable to connect the serial port or Ethernet port
with the XSA330-W to download or upload programs.
Codesys software interface (fit for XSA330-W series)
3.3 Unpacking inspection
Before opening the package, please check whether the product model marked on the outer package is
consistent with the product model ordered. After opening the package, first check whether the surface
of the industrial controller is mechanically damaged, and then carefully check whether the accessories
are complete according to the packing list or the order contract. If the surface of the industrial
controller is damaged or the product content does not meet the requirements, please do not use it and
contact the dealer immediately.
Advertisement
Table of Contents
