Xinje XSA330-W User Manual page 3

Notes
4. Do not bind the controller wiring and power wiring together. In
principle, they should be separated by 10cm. Misoperation and product
damage may be caused.
1. Please install and use this product under the environmental conditions
specified in the general specifications of the manual. Do not use it in
damp, high temperature, places with dust, smoke, conductive dust,
corrosive gas, combustible gas, vibration and impact. It may cause
electric shock, fire, misoperation, product damage, etc.
2. Do not directly touch the conductive part of the product. It may cause
malfunction.
3. Please use the matching DIN rail to fix the product and install it on a
flat surface. Incorrect installation may cause misoperation and product
damage.
4. When processing the screw hole, please do not let the cutting powder
and wire chips fall into the product shell. It may cause malfunction.
5. When connecting the expansion module with the expansion cable,
please make sure that the connection is tight and the contact is good. It
may lead to poor communication and misoperation.
6. When connecting peripheral devices, expansion devices, batteries and
other devices, be sure to power off. It may cause malfunction.
7. Do not disassemble or assemble this product without authorization. The
product may be damaged.
8. Please plug and unplug the connecting cable when the power is off. It
may cause damage to the cable and misoperation.
9. When disassembling the expansion device, peripheral device and
battery, please disconnect the power first. It may cause misoperation,
failure, etc.
10. When the product is discarded, please treat it as industrial waste