Ethernet Interface (Lan) - Xinje XSA330-W User Manual

Iot industrial controller
Table of Contents

Advertisement

1.3.7 Ethernet interface (LAN)

XSA330-W seriesis equipped with four Ethernet interfaces (2 * Ethernet+2 * EtherCAT), as shown in
Figure 1-7, supporting 10/100/1000Mbps and conforming to IEEE 802.3az. The port adopts a standard
RJ-45 jack with LED indicators to indicate the connection and transmission status.
RJ45 port
Support Modbus-TCP, UDP and other communication protocols. It can be used
to upload and download programs, online monitoring, remote monitoring, etc.,
and can communicate with other TCP IP devices in the LAN
Ethernet
EtherCAT
EtherCAT Indicators
Figure 1-7 Ethernet port
LED indicator
Left LED
Orange
10 / 100/ 1000 Link
Item
Communication
protocol
Communication speed
Max network nodes
Max station spacing
Network topology
EtherCAT bus control, control cycle ≤ 1ms.
Item
Physical layer
Baud rate
Topology
Cable
Cable length
Com port
( LED)
Right LED
Green
Transmission
Function
Parameter
MODBUS TCP
1000Mbps
Specification
100BASE-TX (IEEE802.3)
1000[Mbps] (full duplex)
JC-CB twisted pair (shielded twisted pair)
Up to 100m between nodes
1Port (RJ45)
[Run]
[L/A IN] Port0 Link/Activity Indicator (Green)
[L/A OUT] Port 1 Link/Activity Indicator (Green)
30
100 m
Linear
Line
RUN Indicator

Advertisement

Table of Contents
loading

Table of Contents