Xinje XSA330-W User Manual page 2

This product and related documents are issued by Wuxi Xinje Electric Co., Ltd. in 2021, and all copyrights are
reserved. Product specifications are subject to change without notice. This document shall not be copied,
reproduced, translated or transmitted in any way or form without the permission of the authorized person. The
purpose of this document is to provide accurate and reliable information. Wuxi Xinje Electric Co., Ltd. will
not be responsible for the use of this manual or the damage to the rights and interests of third parties caused
by the use of this manual.
Electrostatic
protection
FCC
Attension
Please observe the following simple protective measures before using the
equipment to protect yourself and the product from injury:
Before using the equipment, be sure to disconnect the power supply to avoid
electric shock. Do not touch any components on the CPU or board when the
device is turned on.
Disconnect the power before making any hardware configuration changes.
Sudden electric shock when connecting jumpers or installing boards may
damage sensitive electronic components.
Note: According to Article 15 of FCC Rules, this equipment has been tested
and determined to conform to the Class A digital equipment standard. These
restrictions are intended to provide reasonable protection against harmful
interference to the operation of the system in a commercial environment.
This equipment will generate, consume and transmit radio frequency energy.
If it is not correctly installed and used according to the manual, it may cause
harmful interference to the equipment
1. Misuse may cause danger, personal injury or serious injury, and may
cause serious property loss.
2. Do not install and use the damaged IoT industrial controller, the IoT
industrial controller without parts, or the IoT industrial controller
whose model does not meet the requirements. There is risk of injury.
3. Please design a safety loop outside the IoT industrial controller to
ensure that the whole system can operate safely even if the circuit is
abnormal. Risk of causing malfunction.