Boot Setting - Xinje XSA330-W User Manual

5.7 Boot setting

(1) Boot Configuration
Setup Prompt Timeout: Set prompt time
The power on POST displaying dwell time. The larger the value, the longer the dwell time.
Bootup NumLock State: Num Lock state after system startup.
The set values are: [On]/[Off]. This option specifies the status of the Num Lock key on the keyboard
after the controller is started.
Quiet Boot: static start.
The set values are [Disabled]/[Enabled]. This option specifies whether to display LOGO when the
controller starts.
(2) Boot Option Priorities
Boot Option # 1: First boot option. Use this option to select which disk to start from.
Fast Boot: quick start
The set values are [Disabled]/[Enabled]. This option specifies whether to perform hardware self-test at
startup.
(3) New Boot Option Policy: new boot policy
Figure 5-6 Boot menu