TROUBLESHOOTING
Many malfunctions and faults that might occur in daily operation can be easily remedied.
The following guide may help you to find the reason for a malfunction and correct it.
Display
"E32"
"E33"
"E82"
"Full"
WARNING:
•
Only authorised technicians can carry out repairs.
•
If any other error code is displayed. Contact help.Kogan.com for
support.
Note:
Prior to contacting the help.Kogan.com, refer to troubleshoot table below to resolve
any issues on your own.
Problem
Display is not on
" " indicator is on
"
" indicator is on
26
Reason
Humidity sensor error
Temperature sensor error
PCB communication error
Container is full
•
Check the power supply.
•
Check if the power plug is connected.
•
Check the selected programme.
•
Press the Power button.
•
Check the water container. If it's full, empty out
the condensate water and restart the dryer.
•
If the container is not full, restart the dryer.
•
If the " " icon is still lighting after you have
finished the first two steps, please call the service.
Clean the lint filter.
Solutions
Contact help.Kogan.com
if this problem occurs.
Empty container
Solution