Table of Contents
Advertisement
Transport
•
Exercise caution while moving the heat pump dryer. Avoid gripping any protruding
parts of the machine. Note that the machine door should not be used as a handle
during transportation.
•
If the dryer needs to be transported in a non-upright position, it can be tilted no more
than 30°.
Risk of Injury and Damage
Improper handling of the appliance can lead to injuries. Consider the following precautions:
•
The appliance is quite heavy. It should never be transported or carried alone. Always
seek assistance from another person.
•
Clear the transport route and installation location of any obstacles, such as open doors
or objects on the floor.
•
Do not use the open door as a handhold.
•
Prior to setting up the tumble dryer, inspect it for any visible external damage. If there
are signs of damage, do not install or use a damaged tumble dryer and contact
help.Kogan.com for support.
•
Avoid installing the tumble dryer in a room where frost is likely to occur. The tumble
dryer may not function properly at temperatures around freezing point. Freezing of the
condensed water in the pump and hoses can cause damage.
Installation Position
•
Avoid installing the appliance behind a door that can be locked, a sliding door, or a
door with hinges on the opposite side of the tumble dryer. Such placement may restrict
the full opening of the tumble dryer door.
•
Ensure that the floor clearance is not obstructed by deep pile carpets, wooden strips, or
similar objects. Obstructions can cause heat build-up, which can interfere with the
appliance's operation.
•
For convenience, it is recommended to position the machine close to your washing
machine.
•
Do not stack the dryer on a washing machine without using appropriate stacking kits. If
you intend to stack the dryer on a washing machine, purchase the necessary parts
separately. The installation should be carried out by a qualified individual to prevent
any hazards.
•
The tumble dryer should be installed in a clean area where dirt does not accumulate. It
is important to ensure that there is sufficient air circulation around the appliance. Avoid
obstructing the front air inlet or the air intake grilles located at the back of the machine.
•
To minimize vibration and noise during dryer operation, place it on a firm and level
surface.
12
Advertisement
Table of Contents
