Table of Contents
Advertisement
TROUBLESHOOTING
Some issues are caused due to lack of simple maintenance or oversights, which can be
solved easily. Before contacting help.Kogan.com for support, please carry out the checks
listed below.
If the dryer encounters a problem during operation, the Start/Pause indicator light will flash.
Once the problem has been eliminated, press the Start/Pause button to restart the
program, if after all checks, the problem persists, contact help.Kogan.com for support.
Issue
Dryer not turning on
Drying results
unsatisfactory
Drum light does not
work
Drying cycle ends
shortly after program
starts. "End" light
illuminated.
Drying cycle lasts an
unusually long time.
Possible cause
•
Mains plug is not plugged in.
•
Loading door is open.
•
Have you pressed the
button?
•
Wrong program selected.
•
Filter clogged.
•
Incorrect volume of laundry.
Light bulb is defective.
Not enough washing loaded or
washing loaded is too dry for
selected program.
Load volume is too big.
Solution
•
Plug in at socket.
•
Close loading door.
•
Press the
button
again.
•
Select a different
program the next
time you dry.
•
Clean lint filter.
•
Observe
recommended
loading volumes.
Replace light bulb.
Select higher drying level
(e.g., Heavy instead of
Strong).
Reduce load volume.
Advertisement
Table of Contents
